The following is introducedStainless steel pressure tankThe types as well as the main role

　　At present, there are two types of small pressure tanks on the market: aeration type and diaphragm type，The air in the pressure tank will be in direct contact with the water source，After a while，Air will be lost.，Dissolve in water，Regular air replenishment is required，To maintain the normal operation of the stainless steel pressure tank，For this pressure tank，It is usually filled with an inert gas，Such as nitrogen，For diaphragm pressure tanks，It is necessary to install a pressure tank between the pump and the pipe network, when the water in the pipe network is less, the water level in the tank will rise, at this time, the air in the tank will be compressed, the pressure will rise, so that the water can be supplied。

　　In the subsequent process of continuous water use by the user，The air in the tank will enter the pipe network，Cause the water level to drop，The pressure in the tank drops，When the pressure drops to the lower limit，The electric pressure gauge will receive a lower limit electric shock，The motor and pump will work again，In general，The pump itself can be adjusted to stop and start depending on whether water is used，So as to achieve the purpose of keeping water inside the motor。

　　Stainless steel pressure tankWhat is its main function?

　　Stainless steel pressure tankIt is often used for the circulation of liquids and gases, and can achieve a variety of functions when used, such as a good transfer function when used, in fact, when transporting some liquids or gases, there are often transit requirements, this time you can also use this tank, through its transmission, you can achieve better results when transporting。

　　Another reason is that it has a pressurizing function，Nowadays, many liquids or gases will face certain pressure during transportation，In this case，If you want to increase its power，It tends to increase its transportation cost to some extent，但是，If you use this pressure tank，The result is different，It's more energy efficient.。

　　有了Stainless steel pressure tankThe function of，It can also act as a buffer，It can achieve better follow-up requirements during transportation，It can also achieve good protection and use of transportation equipment，Now some transport is often a form of direct transport，Can't protect pipes or other equipment，But if you use a device like this，The effect is different。

　　Some tips for selecting stainless steel pressure tanks

　　1, to consider the design pressure and material selection

　　The design pressure of stainless steel pressure tank meets the requirements, followed by material selection and material thickness, the exhaust pressure of air compressor is generally 7, 8, 10, 13 kg, of which 7, 8 kg is widely used, so it is generally 1/7 of the air volume of air compressor as the selection criteria for tank capacity。

　　2. Look at the appearance

　　The appearance of stainless steel pressure tank products reflects the grade and value of the product, only the regular strength of the manufacturers have good equipment protection and good protection system, in order to ensure the appearance of product grade。

　　3, look at the product nameplate

　　The name plate should indicate the name of the manufacturer and the inspection unit and the date of production，And indicate in the upper right corner of the nameplate whether there is a seal of the inspection unit，此外，The nameplate needs to indicate the product number, weight, volume, pressure and working pressure，And the pressure of the hydrostatic test，And indicate the medium of the gas storage tank，The steel number of the product needs to be directly below the nameplate of the entire tank，The steel seal number must be the same as the number on the nameplate，If the number of these two inventions does not match。

　　Well Xiaobian will not explain a lot, thank you for watching, let's see you next time。